Netgear D6400 User Manual - Page 247
Unblock the Traffic Meter After the Traffic Limit Is Reached, Manage the Modem Router Remotely
View all Netgear D6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 247 highlights
AC1600 WiFi VDSL/ADSL Modem Router Model D6400 12. Click the Apply button. Your settings are saved. The Internet Traffic Statistics section helps you to monitor the data traffic. For more information, see View the Traffic Statistics and Traffic Status on page 243. Unblock the Traffic Meter After the Traffic Limit Is Reached If you configured the traffic meter to disconnect and disable the Internet connection after the traffic limit is reached, you cannot access the Internet until you unblock the traffic meter. CAUTION: If your ISP set a traffic limit, your ISP might charge you for the overage traffic. To unblock the traffic meter: 1. Launch an Internet browser from a computer or WiFi device that is connected to the network. 2. Type http://www.routerlogin.net. A login screen displays. 3. Enter the user name and password for the modem router. The user name is admin. The default password is password. The user name and password are case-sensitive. 4. Click the OK button. The BASIC Home screen displays. 5. Select ADVANCED > Advanced Setup > Traffic Meter. The Traffic Meter screen displays. 6. In the Traffic Control section, clear the Disconnect and disable the Internet connection check box. 7. Click the Apply button. Your settings are saved. Manage the Modem Router Remotely The remote management feature lets you access your modem router securely over the Internet to view or change its settings. You must know the modem router's WAN IP address to use this feature. For information about remote access using Dynamic DNS, see Chapter 8, Access Storage Devices Through the Internet. Manage the Modem Router and Monitor the Traffic 247