Netgear D6400 User Manual - Page 62
Field, Description, Other, Transfer Mode, DSL Mode, Enable This, Interface, Use VLANID, PPPoE
View all Netgear D6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
AC1600 WiFi VDSL/ADSL Modem Router Model D6400 7. Enter the VDSL settings as described in the following table. Field Select Country Select Internet Service Provider Transfer Mode DSL Mode Enable This Interface Multiplexing Method VPI VCI Use VLANID Priority (802.1p) Encapsulation Login Password Service Name (If Required) Description Select the country in which you use the modem router. Select the Internet service provider (ISP) that you are using. If your ISP is not in the menu, select Other. For a VDSL connection, select PTM. When you select PTM from the Transfer Mode menu, the only option in the DSL Mode menu is VDSL. Make sure that WAN1 is selected from the menu and that the Enable This Interface check box is selected. These are the default settings. Note: For information about interface WAN2, see Enable the WAN2 Interface for IPTV on page 197. These settings are disabled because they do not apply to a VDSL connection. Select the Use VLANID check box and enter the VLAN ID, as indicated by your ISP. A VLAN ID might be required if you subscribe to both Internet service and IPTV service. In some unusual situations, a VLAN ID is required for VDSL Internet service. If your ISP did not provide you with a VLAN ID, leave the Use VLANID check box cleared, which is the default setting. For information about setting up VLAN tag groups, see Set Up a Bridge for a VLAN Tag Group on page 202. If your ISP provided you with a VLAN ID and a priority value, enter the priority value, which is a number from 0 to7. You can enter a priority value only in combination with a VLAN ID. If your ISP did not provide you with a priority value, leave the default setting (0). For a PPP over Ethernet (PPPoE) connection, select PPPoE from the menu. Note: PPP over ATM (PPPoA) is not supported for a VDSL connection. Enter the login name that you use to log in to your Internet service, as indicated by your ISP. This login name is often an email address. Enter the password that you use to log in to your Internet service, as indicated by your ISP. Enter the service name that you use to log in to your Internet service, as indicated by your ISP. Often, a service name is not required. Manage the Internet Settings Manually 62