Netgear D6400 User Manual - Page 205
Set Up a Default DMZ Server, Disable Port Scan and DoS Protection
![]() |
View all Netgear D6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
AC1600 WiFi VDSL/ADSL Modem Router Model D6400 The WAN Setup screen displays. 6. To enable port scan and DoS protection, clear the Disable Port Scan and DoS Protection check box. Note: Enabling port scan and DoS protection might affect the performance of the modem router. 7. To enable modem router to respond to a ping, select the Respond to Ping on Internet Port check box. 8. Click the Apply button. Your settings are saved. Set Up a Default DMZ Server The default DMZ server feature is helpful when you are using some online games and videoconferencing applications that are incompatible with Network Address Translation (NAT). The modem router is programmed to recognize some of these applications and to work correctly with them, but other applications might not function well. In some cases, one local computer can run the application correctly if the IP address for that computer is entered as the default DMZ server. WARNING: DMZ servers pose a security risk. A computer designated as the default DMZ server loses much of the protection of the firewall and is exposed to exploits from the Internet. If compromised, the DMZ server computer can be used to attack other computers on your network. The modem router usually detects and discards incoming traffic from the Internet that is not a response to one of your local computers or a service or application for which you set up a port forwarding or port triggering rule. Instead of discarding this traffic, you can direct the modem router to forward the traffic to one computer on your network. This computer is called the default DMZ server. To set up a default DMZ server: 1. Launch an Internet browser from a computer or WiFi device that is connected to the network. 2. Type http://www.routerlogin.net. A login screen displays. 3. Enter the modem router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. Manage the WAN and LAN Network Settings 205
![](/manual_guide/products/netgear-d6400-user-manual-f7b9157/205.png)