Netgear D6400 User Manual - Page 215
Disable the Built-In DHCP Server, Use Router as DHCP Server, Starting IP Address, Apply
View all Netgear D6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
AC1600 WiFi VDSL/ADSL Modem Router Model D6400 6. Make sure that the Use Router as DHCP Server check box is selected. This check box is selected by default. 7. Specify the range of IP addresses that the modem router assigns: • In the Starting IP Address field, enter the lowest number in the range. This IP address must be in the same subnet as the modem router. By default, the starting IP address is 192.168.0.2. • In the Ending IP Address field, enter the number at the end of the range of IP addresses. This IP address must be in the same subnet as the modem router. By default, the ending IP address is 192.168.0.254. 8. Click the Apply button. Your settings are saved. Disable the Built-In DHCP Server By default, the modem router functions as a DHCP server. The modem router assigns IP, DNS server, and default gateway addresses to all devices connected to the LAN. The assigned default gateway address is the LAN address of the modem router. You can use another device on your network as the DHCP server or specify the network settings of all your computers. Manage the WAN and LAN Network Settings 215