Netgear D6400 User Manual - Page 264
Change a Port Forwarding Rule, Apply, admin, password
![]() |
View all Netgear D6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 264 highlights
AC1600 WiFi VDSL/ADSL Modem Router Model D6400 Field Description Internal Starting Port Specify the internal start port by one of these methods: • Leave the Use the same port range for Internal port check box selected. • Clear the Use the same port range for Internal port check box and enter the internal start port number that the service or application uses. Internal Ending Port Specify the internal end port by one of these methods: • Leave the Use the same port range for Internal port check box selected. • Clear the Use the same port range for Internal port check box and enter the internal end port number that the service or application uses. Internal IP address Either enter an IP address in the Internal IP address field or select the radio button for an attached device that is listed in the table. 10. Click the Apply button. Your settings are saved. The rule is added to the table on the Port Forwarding / Port Triggering screen. Change a Port Forwarding Rule You can change an existing port forwarding rule. To change a port forwarding rule: 1. Launch an Internet browser from a computer or WiFi device that is connected to the network. 2. Type http://www.routerlogin.net. A login screen displays. 3. Enter the user name and password for the modem router. The user name is admin. The default password is password. The user name and password are case-sensitive. 4. Click the OK button. The BASIC Home screen displays. 5. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering. The following figure shows two port forwarding rules. Manage Port Forwarding and Port Triggering 264
![](/manual_guide/products/netgear-d6400-user-manual-f7b9157/264.png)