Netgear D6400 User Manual - Page 173
Safely Remove a USB Device, Apply, Approved Devices, Allow only approved devices
View all Netgear D6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
AC1600 WiFi VDSL/ADSL Modem Router Model D6400 7. Click the No radio button. By default the Yes radio button is selected. This setting lets you connect and access all your USB devices. 8. Click the Apply button. Your settings are saved. 9. Click the Approved Devices button. 10. In the Available USB Devices table, select the USB device that you want to approve. 11. Click the Add button. The USB device is added to the Approved USB Devices table. 12. To approve a second USB device that is attached to the modem router, repeat Step 10 and Step 11. 13. Select the Allow only approved devices check box. 14. Click the Apply button. Your settings are saved. To approve another USB device that is not connected to one of the two USB ports, first remove one of the USB devices (see Safely Remove a USB Device on page 173), connect the other USB device, and repeat this procedure. Safely Remove a USB Device Before you physically disconnect a USB device from the USB port on the modem router, log in to the modem router, and take the drive offline. To remove a USB device safely: 1. Launch an Internet browser from a computer or WiFi device that is connected to the network. 2. Type http://www.routerlogin.net. Share a Storage Device 173