Netgear DGN2200v1 DGN2200 User Manual - Page 104
IP Address, PPP Adapter, Pre-Shared Key, Enter Key, Proposal 1
View all Netgear DGN2200v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
N300 Wireless ADSL2+ Modem Router DGN2200 c. In the ID Type drop-down list, select IP Address. If you are using a virtual fixed IP address, enter this address in the Internal Network IP Address field. Otherwise, leave this field empty. d. In the Internet Interface section of the screen, select the adapter that you use to access the Internet. If you have a dial-up Internet account, select PPP Adapter in the Name field. If you have a dedicated cable or DSL line, select your Ethernet adapter. If you will be switching between adapters or if you have only one adapter, select Any. e. In the My Identity section of the screen, click the Pre-Shared Key button. The Pre-Shared Key screen displays: f. Click Enter Key. Enter the modem router pre-shared key, and then click OK. In this example, 12345678 is entered, though asterisks are displayed in the field. This field is case-sensitive. 5. Configure the VPN client authentication proposal. In this step, you provide the type of encryption (DES or 3DES) to be used for this connection. This selection has to match your selection in the modem router configuration. a. In the Network Security Policy list on the left side of the Security Policy Editor window, expand the Security Policy heading by double-clicking its name or clicking the + symbol. b. Expand the Authentication subheading by double-clicking its name or clicking the + symbol. Then click Proposal 1 below Authentication. c. In the Authentication Method drop-down list, select Pre-Shared key. 104 | Chapter 8. Virtual Private Networking