Netgear FS509 Installation Guide - Page 41
Appendix B Connector Pin Assignments, RJ-45 Plug and Vista RJ-45 Connector
View all Netgear FS509 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Appendix B Connector Pin Assignments This appendix provides information about the RJ-45 plug, the RJ-45 connector, and the fiber connector used for the NETGEAR Model FS509 Gigabit Ethernet Switch. RJ-45 Plug and Vista RJ-45 Connector In a Fast Ethernet network, it is important that all 100BASE-T certified Category 5 cabling use RJ-45 plugs. The RJ-45 plug accepts 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) 100-ohm cable and connects into the vista RJ-45 connector. The vista RJ-45 connector (also referred to as a 10/100 Mbps port) is used to connect stations, hubs, and switches through UTP cable; it supports 10 Mbps or 100 Mbps data transmission. The RJ-45 plug and vista RJ-45 connector are both illustrated in Figure B-1. 12345678 81 711EA Key: 1 to 8 = pin numbers Figure B-1. RJ-45 Plug and Vista RJ-45 Connector with Built-In LEDs Connector Pin Assignments B-1