Netgear FS509 Installation Guide - Page 46

Patch Panels and Cables, C-3

Page 46 highlights

Installation Guide for the Model FS509 Fast Ethernet Switch Patch Panels and Cables If you are using patch panels, make sure that they meet the 100BASE-TX requirements. NETGEAR recommends Category 5 UTP cable for all patch cables and work area cables to ensure that your UTP patch cable rating meets or exceeds the distribution cable rating. To wire patch panels, you need two Category 5 UTP cables with an RJ-45 plug at each end, as shown in Figure C-3. 1 2 1 87654321 87654321 5525.1 Key: 1 = RJ-45 plug 2 = Category 5 UTP patch cable Figure C-3. Category 5 UTP Patch Cable with Male RJ-45 Plug at Each End Note: Flat "silver satin" telephone cable may have the same RJ-45 plug. However, using telephone cable will result in excessive collisions and cause the attached port to be partitioned or disconnected from the network. C-4 Cabling Guidelines

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50

Installation Guide for the Model FS509 Fast Ethernet Switch
C-4
Cabling Guidelines
Patch Panels and Cables
If you are using patch panels, make sure that they meet the 100BASE-TX requirements.
NETGEAR recommends Category 5 UTP cable for all patch cables and work area cables
to ensure that your UTP patch cable rating meets or exceeds the distribution cable rating.
To wire patch panels, you need two Category 5 UTP cables with an RJ-45 plug at each end,
as shown in
Figure C-3
.
Key:
1 = RJ-45 plug
2 = Category 5 UTP patch cable
Figure C-3.
Category 5 UTP Patch Cable with Male RJ-45 Plug at Each End
Note:
Flat “silver satin” telephone cable may have the same RJ-45 plug. However, using
telephone cable will result in excessive collisions and cause the attached port to be
partitioned or disconnected from the network.
87654321
87654321
5525.1
2
1
1