Netgear FS518T FS518 Installation Guide - Page 18

illustrated

Get Netgear FS518T - Switch PDF manuals and user guides
UPC - 606449020366
View all Netgear FS518T manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Installation Guide for the Model FS518 Fast Ethernet Switch As Figure 2-1 shows, the Model FS518 switch is equipped with 16 autosensing 10/100 Mbps Fast Ethernet UTP ports. The network access speed for the 10/100 Mbps ports is automatically sensed and displayed on the front panel by the 10 Mbps or 100 Mbps Link LEDs. The 10/100 Mbps ports support only unshielded twisted pair (UTP) cable using an 8-pin RJ-45 plug. Each of the 10/100 Mbps ports uses vista RJ-45 connectors that have built-in LEDs, as illustrated in Figure 2-2. The LEDs, as described in Table 2-1 on page 2-5, indicate that the connection to the port is valid and that the port is operating at either 10 or 100 Mbps. For further information about the vista RJ-45 connector and the RJ-45 plug, refer to Appendix B, "Connector Pin Assignments," and Appendix C, "Cabling Guidelines." 1 2 735EA Key: 1 = 100M link LED 2 = 10M link LED Figure 2-2. Vista RJ-45 Connector with Built-In LEDs 2-2 Physical Description

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Installation Guide for the Model FS518 Fast Ethernet Switch
2-2
Physical Description
As
Figure
2-
1
shows, the Model FS518 switch is equipped with 16 autosensing 10/100 Mbps Fast
Ethernet UTP ports. The network access speed for the 10/100 Mbps ports is automatically sensed
and displayed on the front panel by the 10 Mbps or 100 Mbps Link LEDs.
The 10/100 Mbps ports support only unshielded twisted pair (UTP) cable using an 8-pin RJ-45
plug. Each of the 10/100 Mbps ports uses vista RJ-45 connectors that have built-in LEDs, as
illustrated in
Figure
2-
2
. The LEDs, as described in
T
able
2-
1
on
page
2-
5
, indicate that the
connection to the port is valid and that the port is operating at either 10 or 100 Mbps.
For further information about the vista RJ-45 connector and the RJ-45 plug, refer to
Appendix
B,
“
Connector Pin
Assignments
,” and
Appendix
C, “
Cabling Guidelines
.”
Key:
1 = 100M link LED
2 = 10M link LED
Figure 2-2.
Vista RJ-45 Connector with Built-In LEDs
735EA
1
2