Netgear GS108PE ProSafe Plus Switches Configuration Utility User Guide - Page 19

Set the IP Address Information, Maintenance, Change Password, Device Reboot - factory reset

Get Netgear GS108PE PDF manuals and user guides View all Netgear GS108PE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

ProSafe Plus Switch Utility Set the IP Address Information Enter IP address and subnet mask values for the switch as well as the address of the gateway device used by the switch.  To specify IP interface information: 1. Select System > Status > Switch Information. The Switch Information screen displays. 2. In the DHCP Mode list, select Disable. The IP Address, Subnet Mask, and Gateway Address fields are enabled. 3. Enter the IP address, subnet mask, and if available, the gateway address, and click Apply. Maintenance The Maintenance feature allows you to change the password for the selected switch, perform a device reboot, reset the switch to its factory default settings, or upgrade the switch firmware. Change Password  To change the password for a switch: 1. Select System > Maintenance. The Maintenance menu and Change Password screen display. 2. Enter the old password (the default is password) and then enter the new password. 3. Click Apply. Device Reboot WARNING: Rebooting the switch to briefly disrupts network traffic through the switch.  To reboot the selected switch: 1. Select System > Maintenance > Device Reboot. The Device Reboot screen displays. 2. Select the check box in the Device Reboot screen. 3. Click Apply. Network and System Configuration 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
Network and System Configuration
19
ProSafe Plus Switch Utility
Set the IP Address Information
Enter IP address and subnet mask values for the switch as well as the address of the
gateway device used by the switch.
To specify IP interface information:
1.
Select
System > Status > Switch Information
. The Switch Information screen
displays.
2.
In the DHCP Mode list, select
Disable
. The IP Address, Subnet Mask, and Gateway
Address fields are enabled.
3.
Enter the IP address, subnet mask, and if available, the gateway address, and click
Apply
.
Maintenance
The Maintenance feature allows you to change the password for the selected switch, perform
a device reboot, reset the switch to its factory default settings, or upgrade the switch
firmware.
Change Password
To change the password for a switch:
1.
Select
System
> Maintenance
. The Maintenance menu and Change Password screen
display.
2.
Enter the old password (the default is password) and then enter the new password.
3.
Click
Apply
.
Device Reboot
WARNING:
Rebooting the switch to briefly disrupts network traffic through
the switch.
To reboot the selected switch:
1.
Select
System
> Maintenance > Device Reboot
. The Device Reboot screen displays.
2.
Select the check box in the Device Reboot screen.
3.
Click
Apply
.