Netgear GS108Tv1 GS108T Setup Manual - Page 100
Length Error Frames Receive, Request ID Frames Transmit
View all Netgear GS108Tv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
GS108T Smart Switch Software Administration Manual 2. Under Port Selection, the following fields are displayed, both of which are configurable: • Port. Specifies the port for which the EAP statistics are to be shown. Select a port from the drop-down list. • Refresh Rate. Specifies the period that passes before the EAP statistics are refreshed. The possible field values are: - 15 Sec. Specifies that the EAP statistics are refreshed every 15 seconds. - 30 Sec. Specifies that the EAP statistics are refreshed every 30 seconds. - 60 Sec. Specifies that the EAP statistics are refreshed every 60 seconds. - No Refresh. Specifies that the EAP statistics are not refreshed. 3. Click Apply. Under EAP Statistics, the following information is shown for the selected port: • Frames Receive. Specifies the number of received valid EAP over LANs (EAPOL) frames. • Frames Transmit. Specifies the number of transmitted EAPOL frames. • Start Frames Receive. Specifies the number of received EAPOL start frames. • Log off Frames Receive. Specifies the number of received EAPOL logoff frames. • Respond ID Frames Receive. Specifies the number of received EAP respond ID frames. • Respond Frames Receive. Specifies the number of received valid EAP response frames. • Request ID Frames Transmit. Specifies the number of transmitted EAP request ID frames. • Request Frames Transmit. Specifies the number of transmitted EAP request frames. • Invalid Frames Receive. Specifies the number of received unrecognized EAPOL frames. • Length Error Frames Receive. Specifies the number of received EAPOL frames with an invalid packet body length. • Last Frame Version. Specifies the protocol version number attached to the most recently received EAPOL frame. • Last Frame Source. Specifies the source MAC address attached to the most recently received EAPOL frame. 4. To retrieve the current count from the switch and update the screen, click Refresh (optional). 6-6 Monitoring, Maintenance, and Help v1.0, December 2007