Netgear GS108Tv1 GS108T Setup Manual - Page 37
Advanced-LLDP Configuration, Advanced-LLDP Port Settings, Notification Interval, Fast Start Count
View all Netgear GS108Tv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
GS108T Smart Switch Software Administration Manual • Notification Interval (5-3600 sec). The interval at which notifications are generated when remote MSAP information changes. The default value is 5 seconds. • Fast Start Count (2-10). The number of successive LLDP frame transmissions for one complete fast-start interval. The default value is 4. 5. Click Apply to confirm any settings changes. Advanced-LLDP Configuration The Advanced LLDP Configuration screen is identical to the Basic LLDP Configuration screen. See the previous section. Advanced-LLDP Port Settings When LDDP is enabled, you can view the LLDP port settings in the LDDP Port Settings screen: 1. Select System > LLDP > Advanced > LLDP Port Settings. A screen similar to the following displays. . Figure 3-6 2. You can make changes to the LLDP settings for an individual port, for a group of ports, or for all ports simultaneously: • To change the LLDP settings for an individual port, select the check box to the left of its port number, and then select the LLDP port settings. Managing System Settings 3-9 v1.0, December 2007