Netgear GS108Tv1 GS108T Setup Manual - Page 67
Multicast Group Membership, Delete, Apply, Unit 1
View all Netgear GS108Tv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
GS108T Smart Switch Software Administration Manual To delete a static multicast ID: a. Select the check box to the left of the static multicast ID that you want to remove. b. Click Delete. To change a Layer 2 multicast address: a. Select the VID of the static multicast ID that you want to change. b. Enter the new Layer 2 multicast address. c. Click Apply. Multicast Group Membership To configure members for a multicast group: 1. Select Switching > Multicast > Multicast Group Membership. A screen similar to the following displays. Figure 4-19 2. From the ID drop-down list, select the static multicast ID that represents the multicast group that you want to view or modify. When you make your selection, the VID field and Multicast Entry fields change automatically. You can either assign all ports to or remove them from the static group in step 3, or assign individual ports to or remove them from the static multicast group in step 4. These steps are mutually exclusive. 3. To assign all ports to or remove them from the static multicast group, select the check box to the left of Unit 1. 4. To assign individual ports to or remove them from the static multicast group: a. Click Unit 1. A screen similar to the following displays. Configuring Switching v1.0, December 2007 4-23