Netgear GS108Tv1 GS108T Setup Manual - Page 59
Advanced-Port PVID Configuration, Apply
View all Netgear GS108Tv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
GS108T Smart Switch Software Administration Manual Figure 4-12 b. To assign a port to or remove it from the VLAN, select the check box under an individual port number. 5. Click Apply to confirm any settings changes. Note: When the port-based VLAN type is configured, an ingress (incoming) packet with an IEEE 802.1Q tag is ignored and preserved. Advanced-Port PVID Configuration The Port PVID Configuration screen lets you assign a port VLAN ID (PVID) to an interface. There are certain requirements for a PVID: • All ports must have a defined PVID. • If no other value is specified, the default VLAN PVID is used. • If you want to change the port's default PVID, you must first create a VLAN group that includes the port. Configuring Switching v1.0, December 2007 4-15