Netgear GS108Tv1 GS108T Setup Manual - Page 66
Static Multicasting, Multicast Entry, Port Members, Apply
View all Netgear GS108Tv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
GS108T Smart Switch Software Administration Manual • Multicast Entry. Shows the Layer 2 group multicast address. • Port Members. Shows the membership that is associated with the group. 5. Click Apply to confirm any settings changes. Static Multicasting Static multicast addressing provides a way to add or delete static multicast addresses that are related to a VLAN. To configure static multicasting: 1. Select Switching > Multicast > Static Multicasting. A screen similar to the following displays. Figure 4-18 2. The following information about static multicasting is displayed. Both the VID and Multicast Entry fields are configurable: • ID. Shows the static multicast ID. • VID. Specifies the VLAN ID (VID). Select an existing VID from the drop-down list. • Multicast Entry. Specifies the Layer 2 multicast address. Enter a multicast address in the 01:00:5E:XX:XX:XX format. 3. Perform one of the following actions: To add a multicast entry: a. Select a VID. b. Enter the Layer 2 multicast address. c. Click Add. 4-22 v1.0, December 2007 Configuring Switching