Netgear GS108Tv1 GS108T Setup Manual - Page 58
Port-Based VLAN Membership, following displays.
View all Netgear GS108Tv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
GS108T Smart Switch Software Administration Manual b. Assign a tag setting to or remove it from a port by toggling the check box under an individual port number. The tag settings determine if packets that are transmitted from the port are tagged with the VLAN ID and other information. The possible tag settings are: - T. Specifies that the egress packet is tagged for the port. - U. Specifies that the egress packet is untagged for the port. - Empty. Specifies that the port is not part of the VLAN. 5. Click Apply to confirm any settings changes. Port-Based VLAN Membership To configure VLAN membership for port-based VLANs: 1. Select Switching > VLAN > Advanced > VLAN Membership. A screen similar to the following displays. . Figure 4-11 2. From the VLAN Identifier drop-down list, select the number that represents the VLAN you want to view or modify. You can either assign all ports to or remove them from the VLAN in step 3, or assign individual ports to or remove them from the VLAN in step 4. These steps are mutually exclusive. 3. To assign all ports to or remove them from the VLAN, select the check box to the left of Unit 1. 4. To assign individual ports to or remove them from the VLAN: a. Click Unit 1. A screen similar to the following displays. 4-14 v1.0, December 2007 Configuring Switching