Netgear GS108Tv1 GS108T Setup Manual - Page 63
TO INTERFACE, To change the RSTP port settings for all ports simultaneously
View all Netgear GS108Tv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
GS108T Smart Switch Software Administration Manual Figure 4-16 2. You can make changes to the RSTP port settings for an individual port, for a group of ports, or for all ports simultaneously: • To change the RSTP port settings for an individual port, select the check box to the left of its port number, and then select the RSTP port settings. Note: You can also enter the interface number (that is, the port number) in the GO TO INTERFACE field, and then click GO. • To change the RSTP port settings for a group of ports, select the check boxes to the left of their port numbers, and then select the RSTP port settings. • To change the RSTP port settings for all ports simultaneously, select the check box at the top of the column of check boxes, and then select the RSTP port settings. Configuring Switching v1.0, December 2007 4-19