Netgear GS108Tv1 GS108T Setup Manual - Page 51
Advanced-LACP Configuration, LACP System Setting, Apply
View all Netgear GS108Tv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
GS108T Smart Switch Software Administration Manual Advanced-LACP Configuration The LACP Configuration screen lets you set the LACP system priority, which specifies the device's link aggregation priority relative to the devices at the other ends of the links on which link aggregation is enabled. To configure LACP: 1. Select Switching > LAG > Advanced > LACP Configuration. A screen similar to the following displays. Figure 4-5 The LACP System Setting field is the only configurable field in this screen: • LACP System Setting. LACP Port priority ranges from 0 to 65536. A higher value indicates a lower priority. The default value is randomly selected. 2. Click Apply to confirm any settings changes. Advanced-LACP Port Configuration The LACP Port Configuration screen, which is also referred to as the LACP Port Priority screen, lets you set the LACP port priority and time-out value: 1. Select Switching > LAG > Advanced > LACP Port Configuration. A screen similar to the following displays. Configuring Switching 4-7 v1.0, December 2007