Netgear GS305EPP User Manual - Page 35
Activate the Basic Port-Based VLAN mode and assign VLANs
![]() |
View all Netgear GS305EPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Gigabit Ethernet Plus Switches Table 4. Supported VLAN modes for the GS308EP and GS308EPP (Continued) VLAN Feature Multiple VLANs on a single port Voice VLAN Basic Port-Based VLAN No No Advanced Port-Based VLAN Yes No Basic 802.1Q VLAN Advanced 802.1Q VLAN Yes (trunk port only) Yes No Yes Activate the Basic Port-Based VLAN mode and assign VLANs By default, all types of VLANs are disabled on the switch. When you activate the Basic Port-Based VLAN mode, all VLANs are added to the switch, and all ports are made members of VLAN 1. This is the default VLAN in the Basic Port-Based VLAN mode. In the Basic Port-Based VLAN mode, you can assign each port (other than the uplink port) to a single VLAN only. To activate the Basic Port-Based VLAN mode and assign VLANs: 1. Open a web browser from a computer that is connected to the same network as the switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password is the one that you specified the first time that you logged in. The password is case-sensitive. The HOME page displays. 4. From the menu at the top of the page, select SWITCHING. The QOS page displays. 5. From the menu on the left, select VLAN. The VLAN page displays. 6. In the Basic Port-Based VLAN section, click the ACTIVATE MODE button. A pop-up window opens, informing you that the current VLAN settings will be lost. 7. Click the CONTINUE button. Use VLANS for Traffic 35 Segmentation User Manual
![](/manual_guide/products/netgear-gs308ep-user-manual-0cbc1d3/35.png)