Netgear GS305EPP User Manual - Page 67
Reenable the DHCP client of the switch
![]() |
View all Netgear GS305EPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Gigabit Ethernet Plus Switches Reenable the DHCP client of the switch If you disabled the DHCP client of the switch and changed the IP address of the switch to a fixed (static) IP address, you can reverse the situation. To reenable the DHCP client on the switch: 1. Open a web browser from a computer that is connected to the same network as the switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password is the one that you specified the first time that you logged in. The password is case-sensitive. The HOME page displays. 4. Select IP Address (Fixed IP). The button bar in the DHCP section displays gray because the DHCP client of the switch is disabled. 5. Click the button in the DHCP section. The button bar displays green, indicating that the DHCP client of the switch is enabled. You can no longer change the IP address fields. 6. Click the APPLY button. A pop-up window displays a message. 7. Click the X in the pop-up window. Your settings are saved. The switch receives an IP address from a DHCP server (or a router that functions as a DHCP server) in your network. Your switch web session might be disconnected when you enable the DHCP client of the switch. Manage the Switch in Your 67 Network User Manual
![](/manual_guide/products/netgear-gs308ep-user-manual-0cbc1d3/67.png)