Netgear GS305EPP User Manual - Page 51
To assign a PVID to a port, SWITCHING, PVID Table, APPLY
![]() |
View all Netgear GS305EPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Gigabit Ethernet Plus Switches you connect a computer to port 6 of the switch and you want it to be a part of VLAN 2, add port 6 as a member of VLAN 2 and set the PVID of port 6 to 2. This configuration automatically adds a PVID of 2 to all data that the switch receives from the computer and makes sure that the data from the computer on port 6 can be seen only by other members of VLAN 2. You can assign only one PVID to a port. Note: If you did not yet create an advanced 802.1Q VLAN, all ports are assigned PVID 1 and you cannot assign another PVID to a port. In this situation, first create an advanced 802.1Q VLAN (see Create an advanced 802.1Q VLAN on page 48). To assign a PVID to a port: 1. Open a web browser from a computer that is connected to the same network as the switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password is the one that you specified the first time that you logged in. The password is case-sensitive. The HOME page displays. 4. From the menu at the top of the page, select SWITCHING. The QOS page displays. 5. From the menu on the left, select VLAN. The VLAN page displays. If you did not yet activate the Advanced 802.1Q VLAN mode, see Activate the advanced 802.1Q VLAN mode on page 47. 6. In PVID Table section in the right pane, click the PVID Table link. The Port and VLAN IDs pane displays. 7. Click the icon for a port. A menu displays. The menu lets you select a PVID for the port. 8. From the menu, select a VLAN ID and name. You can select only a VLAN that the selected port is a member of. 9. Click the APPLY button. Your settings are saved. The Port and VLAN IDs pane displays again. The VLAN ID that is assigned as the PVID displays with an asterisk (*) next to the port. 10. Click the BACK button. Use VLANS for Traffic 51 Segmentation User Manual
![](/manual_guide/products/netgear-gs308ep-user-manual-0cbc1d3/51.png)