Netgear GS724TPv2 Hardware Installation Guide - Page 13

GS724TPv2 ProSAFE 24-Port Gigabit Smart Managed Switch with PoE+ and 2 SFP Ports SFP Ports for Fiber Connectivity To enable fiber connections on the switch, SFP+ fiber ports accommodate standard small form-factor pluggable (SFP) gigabit interface converters (GBICs, also referred to as transceiver modules) for 1G fiber connectivity. GBICs are sold separately from the switch. The switch supports the following NETGEAR ProSAFE SFP short-reach transceiver modules: • AGM731F SFP transceiver 1000BASE-SX, SFP multimode LC GBIC • AGM734 SFP transceiver 1000BASE-T, SFP copper RJ-45 GBIC For more information about NETGEAR ProSAFE SFP and SFP+ transceiver modules and cables, visit netgear.com/business/products/switches/modules-accessories. Reset Button The switch provides a Reset button on the front panel so that you can reboot the switch. We recommend that you save the configuration before you press the Reset button. To reboot the switch: 1. Insert a device such as a straightened paper clip into the opening. 2. Press the recessed Reset button. The switch reboots. Factory Defaults Button The switch provides a Factory Defaults button on the front panel so that you can return the switch to its factory default settings, causing all custom settings to be erased. To return the switch to its factory default settings: 1. Insert a device such as a straightened paper clip into the opening. 2. Press the recessed Factory Defaults button for more than two seconds. The switch reboots and returns to its factory default settings. Hardware Overview 13