Netgear GS724TPv2 Hardware Installation Guide - Page 18
Place the Switch on a Flat Surface, Optional Step 5: Install SFP Transceiver Modules
View all Netgear GS724TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
GS724TPv2 ProSAFE 24-Port Gigabit Smart Managed Switch with PoE+ and 2 SFP Ports 4. Align the mounting holes in the brackets with the holes in the rack, and insert two pan-head screws with nylon washers through each bracket and into the rack. 5. Tighten the screws with a No. 2 Phillips screwdriver to secure the mounting brackets to the rack. Place the Switch on a Flat Surface The switch ships with four self-adhesive rubber footpads. To install the switch on a flat surface: Stick one rubber footpad on each of the four concave spaces on the bottom of the switch. The rubber footpads cushion the switch against shock and vibrations. They also provide ventilation space between stacked switches. Optional Step 5: Install SFP Transceiver Modules The following optional procedure describes how to install an optional SFP transceiver module into one of the SFP ports of the switch. Note Contact your NETGEAR sales office to purchase these modules. If you do not want to install an SFP module, skip this procedure. Installation 18