Netgear GSM7212F GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 251

Web Management User Guide Console Port To display the Console Port page, click Security  Access > Console Port. 1. Use Serial Port Login Timeout (minutes) to specify how many minutes of inactivity should occur on a serial port connection before the switch closes the connection. Enter a number between 0 and 160: the factory default is 5. Entering 0 disables the time-out. 2. Use Baud Rate (bps) to select the default baud rate for the serial port connection from the pull-down menu. You may choose from 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200 baud. The factory default is 9600 baud. 3. Use Login Authentication List to specify which authentication list to use when you login through Telnet. The default value is defaultList. 4. Use Enable Authentication List to specify which authentication list you are using when going into the privileged EXEC mode. The default value is enableList. Field Character Size (bits) Flow Control Stop Bits Parity Description The number of bits in a character. This is always 8. Whether hardware flow control is enabled or disabled. It is always disabled. The number of stop bits per character. Its is always 1. The parity method used on the serial port. It is always None. 251