Netgear GSM7212F GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 252
Denial of Service, Denial of Service Min TCP Header Size
View all Netgear GSM7212F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 252 highlights
Web Management User Guide Denial of Service To display the Denial of Service page, click Security Access > Denial of Service. 1. Use Denial of Service Min TCP Header Size to specify the Min TCP Hdr Size allowed. If DoS TCP Fragment is enabled, the switch will drop these packets: • First TCP fragments that has a TCP payload - IP_Payload_Length - IP_Header_Size < Min_TCP_Header_Size. The factory default is disabled. 2. Use Denial of Service L4 Port to enable L4 Port DoS prevention causing the switch to drop packets having source TCP/UDP port number equal to destination TCP/UDP port number. The factory default is disabled. 3. Use Denial of Service First Fragment to enable First Fragment DoS prevention causing the switch to check DoS options on first fragment IP packets when switch are receiving fragmented IP packets. Otherwise, switch ignores the first fragment IP packages. The factory default is disabled. 4. Use Denial of Service ICMP to enable ICMP DoS prevention causing the switch to drop ICMP packets that have a type set to ECHO_REQ (ping) and a size greater than the configured ICMP Pkt Size. The factory default is disabled. 5. Use Denial of Service Max ICMP Packet Size to specify the Max ICMP Packet Size allowed (This includes the ICMP header size of 8 bytes). If ICMP DoS prevention is enabled, 252