Netgear GSM7328S-200NAS User Guide - Page 18

GSM7328S&gt

Get Netgear GSM7328S-200NAS PDF manuals and user guides View all Netgear GSM7328S-200NAS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Figure 3-4. System Information. 5. The login name is "admin". And there is no password assigned. We strongly recommend you enable password for admin access to secure access to the switch management function. After successful login, the screen should show (GSM7328S)> prompt. Enter "show sysinfo", and it will display the management CPU's IP address. The switch is shipped with DHCP as default to receive its IP address, to manually set a static IP address, you must first disable DHCP as follows: (GSM7328S) > enable Password: After system prompt return, enter the following command (GSM7328S) #network protocol none Changing protocol mode will reset ip configuration. Are you sure you want to continue? (y/n)y After system prompt return, enter the following command (GSM7328S) # network parms 192.168.1.100 255.255.255.0 192.168.1.1 NOTE: This assigns an IP address to the switch in the management VLAN (default: vlan 1). The Page 18 of 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
Page 18 of 24
Figure 3-4. System Information
.
5.
The login name is “admin”. And there is no password assigned. We strongly recommend you enable
password for admin access to secure access to the switch management function. After successful
login, the screen should show
(GSM7328S)>
prompt. Enter “
show sysinfo
”, and it will display the
management CPU’s IP address. The switch is shipped with DHCP as default to receive its IP address,
to manually set a static IP address, you must first disable DHCP as follows:
(GSM7328S) > enable
Password:
<just hit enter>
After system prompt return, enter the following command
(GSM7328S) #network protocol none
Changing protocol mode will reset ip configuration.
Are you sure you want to continue? (y/n)
y
After system prompt return, enter the following command
(GSM7328S) # network parms 192.168.1.100 255.255.255.0 192.168.1.1
NOTE:
This assigns an IP address to the switch in the management VLAN (default: vlan 1).
The