Netgear N600-WiFi User Manual - Page 19
Specify the Cable Connection Starting Frequency, To change the starting frequency, admin, password - speed
View all Netgear N600-WiFi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
N600 WiFi Cable Modem Router Model C3700 2. When asked, provide the modem router's serial number and MAC address on the product label. 3. Wait for your cable ISP to confirm that your modem router is active. 4. If you do not have an Internet connection with the modem router, ask your cable ISP to look for your modem router online, and do one of the following depending on what your cable ISP tells you about your modem router: • If the modem router is not visible, your cable ISP can give you instructions to verify why the modem router does not connect with your high-speed Internet service. • If the modem router is visible to your cable ISP, reboot the computer, laptop, or home gateway that is connected to the modem router. Try checking your online status again. Specify the Cable Connection Starting Frequency The starting frequency is automatically generated. For most Internet connections, you do not need to specify this information. If you need to enter a starting frequency, contact your Internet service provider. To change the starting frequency: 1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://routerlogin.net or http://192.168.0.1. A login screen displays. 3. Enter the modem router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select Cable Connection. Specify Initial Settings 19