Netgear N600-WiFi User Manual - Page 91
Specify When to Use Port Triggering
View all Netgear N600-WiFi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
N600 WiFi Cable Modem Router Model C3700 8. In the Service User list, select Any, or select Single address and enter the IP address of one computer: • Any (the default) allows any computer on the Internet to use this service. • Single address restricts the service to a particular computer. 9. Select the service type, either TCP or UDP or TCP/UDP (both). If you are not sure, select TCP/UDP. 10. In the Triggering Port field, enter the number of the outbound traffic port that will open the inbound ports. 11. Enter the inbound connection port information in the Connection Type, Starting Port, and Ending Port fields. 12. Click the Apply button. The service is now in the Portmap table. You must enable port triggering before the modem router uses port triggering for the service that you added. For information about port triggering, see Specify When to Use Port Triggering on page 90. Specify When to Use Port Triggering To specify when to use port triggering: 1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://routerlogin.net or http://192.168.0.1. A login screen displays. 3. Enter the modem router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering. Specify Internet Port Settings 90