Netgear WAC730 Reference Manual - Page 53
Web Browser Upgrade Procedure, Maintenance > Upgrade > Firmware Upgrade
View all Netgear WAC730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
ProSAFE Dual-Band Wireless AC Access Point WAC720 WAC730 Note: You cannot perform the software upgrade from a computer that is connected to the wireless access point over a wireless link. You must use a computer that is connected to the wireless access point over an Ethernet cable. WARNING: When uploading software to the wireless access point, do not interrupt the web browser by closing the window, clicking a link, or loading a new page. If the browser is interrupted, the upload might fail, corrupt the software, and render the wireless access point inoperable. IMPORTANT: In some cases, such as a major upgrade, you might need to erase the configuration and manually reconfigure your wireless access point after upgrading it. See the release notes included with the software to find out if you must reconfigure the wireless access point. Web Browser Upgrade Procedure To use a web browser to upgrade the wireless access point firmware: 1. Download the new software file from the NETGEAR website and save it to your hard disk. 2. If necessary, unzip the new software file. 3. If available, read the release notes before upgrading the software. 4. Select Maintenance > Upgrade > Firmware Upgrade. 5. Click the Browse button and locate the image (.tar) upgrade file. 6. Click the Apply button to initiate the upgrade process. Management and Monitoring 53