Netgear WAC730 Reference Manual - Page 8
Top panel, Table 1., Top panel LEDs - test
View all Netgear WAC730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
ProSAFE Dual-Band Wireless AC Access Point WAC720 WAC730 123 4 5 Figure 1. Top panel Table 1. Top panel LEDs Item LED 1 2 3 4 2.4 Ghz 5 5 Ghz Description Power/Test Off Power is off. On (green) Power is on. Amber, then blinking green A self-test is running or software is being loaded. During startup, the LED is first steady amber, then goes off, and then blinks green before turning steady green after about 45 seconds. If after one minute the LED remains amber or continues to blink green, it indicates a system fault. Active Off No Ethernet traffic is detected, or no link is detected. On or blinking (green) Ethernet traffic is detected. LAN Off A 10 Mbps or no link is detected on LAN port. Amber A 100 Mbps link is detected on LAN port. Green A 1000 Mbps link is detected on LAN port. WLAN Off The Wireless 802.11b/g/n (2.4 GHz) LAN is not ready, or no wireless activity is detected. On or blinking (green) The Wireless 802.11b/g/n (2.4 GHz) LAN is ready, or wireless activity is detected. WLAN Off The Wireless 802.11n/a (5 GHz) LAN is not ready, or no wireless activity is detected. On or blinking (green) The Wireless 802.11n/a (5 GHz) LAN is ready, or wireless activity is detected. Hardware Setup 8