Netgear WAC740 Hardware Installation Guide - Page 7

ProSAFE Dual Band Wireless AC Access Point Model WAC740 Hardware Description The following sections describe the top and rear hardware functions of the access point. • Top Panel on page 7 • Rear Panel on page 9 • Product Label on page 10 Top Panel The LEDs of the access point are described in the following figure and table: 12 345 6 Figure 1. Top panel Table 1. Top panel LEDs Item Icon 1 LED Name LED Behavior Description Power LED Off Power is off. Solid green Power is on and the access point is ready for operation. Alternating green and amber The access point is receiving insufficient PoE power. Solid amber, then blinking amber, then solid green During startup, while a self-test is running, the Power LED lights solid amber for about 30 seconds, turns solid green temporarily, then blinks amber while the configuration is being synchronized and the firmware is being updated, and finally turns solid green. Introduction and Hardware Overview 7