Netgear WGT624v4 WGT624v4 Reference Manual - Page 15
Port Connections on the Back, Table 1-1., Status Lights continued - reset
View all Netgear WGT624v4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
108 Mbps Wireless Router WGT624 v4 Reference Manual Table 1-1. Status Lights (continued) 3. Wireless On Blink Off On (Amber) 4. Internet On (Green) Blink (Green) Off On (Green) 5. LAN (Local Area Blink (Green) Network) Lights On (Amber) 1-4 Blink (Amber) Off Indicates that the Wireless radio is enabled. Data is being transferred. The wireless router radio is off. (See "Advanced Wireless Settings" in Chapter 2.) The Ethernet cable is connected, but the wireless router has not received an Internet address. The wireless router has an Internet address. Data is being communicated with the Internet. No link is detected on this port. The local port is connected to a 100 Mbps device. Data is being transmitted at 100 Mbps. The local port has detected a link with a 10 Mbps device. Data is being transmitted at 10 Mbps. No link is detected on this port. Port Connections on the Back 2 1 3 4 5 Figure 1-2 The back of the wireless router has the following port connections: 1. Power adapter port 2. Four local Ethernet (LAN) ports for connecting the local computers 3. Internet port for connecting to a cable or ADSL modem 4. Factory default reset button 5. Wireless antenna Connecting the Router to the Internet 1-3 v1.0, May 2007