Netgear WGT624v4 WGT624v4 Reference Manual - Page 43
Restricting Wireless Access by MAC Address, etup Access List. The Wireless Card Access Setup - wgt624 v4 setup
View all Netgear WGT624v4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
108 Mbps Wireless Router WGT624 v4 Reference Manual Restricting Wireless Access by MAC Address To restrict access based on MAC addresses: 1. Log in to the WGT624 v4 wireless router at its default LAN address of http://192.168.1.1 with its default user name of admin and default password of password, or using whatever LAN address and password you have set up. Note: When configuring the wireless router from a wireless computer whose MAC address is not in the Trusted PC list, if you select Turn Access Control On, you will lose your wireless connection when you click Apply. You must then access the wireless router from a wired computer or from a wireless computer which is on the access control list to make any further changes. 2. Click the Wireless Settings link in the Advanced section of the main menu. 3. From the Wireless Settings page, click Setup Access List. The Wireless Card Access Setup page opens: Figure 2-6 4. Select the Turn Access Control On check box. Wireless Settings and Security v1.0, May 2007 2-13