Netgear WGT624v4 WGT624v4 Reference Manual - Page 89
Default Configuration Settings, Table A-1. - hard reset
View all Netgear WGT624v4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
108 Mbps Wireless Router WGT624 v4 Reference Manual Default Configuration Settings You can use the reset button located on the back of your WGT624 v4 wireless router to reset all settings to their factory defaults. This is called a hard reset. To perform a hard reset, push and hold the reset button for 3 seconds. Your wireless router will return to the factory configuration settings shown in the table below. Table A-1. Default Configuration Settings Feature Default Behavior Smart Wizard Disabled Router Login Router Login URL http://www. routerlogin.net or http://www.routerlogin.com Login Name (case sensitive) admin Login Password (case sensitive) password Internet Connection WAN MAC Address Use default hardware address MTU Size 1500 Local Network Router LAN IP address (aka Gateway IP 192.168.1.1 address) Router Subnet 255.255.255.0 DHCP Server Enabled Time Zone GMT Time Zone Adjusted for Daylight Savings Disabled Time Firewall Inbound (communications coming in from Disabled (bars all unsolicited requests except for traffic the Internet) on port 80, the http port) Outbound (communications going out to Enabled (all) the Internet) Technical Specifications and Default Configuration A-3 v1.0, May 2007