Netgear WNR2000v2 WNR2000 User Manual - Page 75
Gateway IP Address, Metric, Private, Static Routes, Route Name, Active
View all Netgear WNR2000v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
NETGEAR Wireless-N Router WNR2000 User Manual • The Gateway IP Address field specifies that all traffic for these addresses should be forwarded to the ISDN router at 192.168.1.100. • A Metric value of 1 will work since the ISDN router is on the LAN. • Private is selected only as a precautionary security measure in case RIP is activated. To add or edit a static route: 1. Select Static Routes under Advanced in the main menu. The Static Routes screen displays. Figure 4-5 2. Click Add to expand the Static Routes screen. Figure 4-6 3. In the Route Name field, enter a name for this static route. (This is for identification purposes only.) 4. Select the Private check box if you want to limit access to the LAN only. If Private is selected, the static route is not reported in RIP. 5. Select the Active check box to make this route effective. Customizing Your Network Settings v1.3, February 2009 4-11