Netgear WNR854T WNR854T Reference Manual - Page 65
Setting the MTU Size, Using the LAN IP Setup Options
UPC - 606449047271
View all Netgear WNR854T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
RangeMax NEXT Wireless Router Model WNR854T Reference Manual Setting the MTU Size The default MTU size is usually fine. The normal MTU (Maximum Transmit Unit) value for most Ethernet networks is 1500 Bytes. For some ISPs, particularly some using PPPoE, you may need to reduce the MTU to 1492. This should not be done unless you are sure it is necessary by your ISP. Any packets sent through the router that are larger than the configured MTU size will be repackaged into smaller packets to meet the MTU requirement. To change the MTU size: 1. Under MTU Size, enter a new size between 64 and 1500. 2. Click Apply to save the new configuration. Using the LAN IP Setup Options The second feature category under the Advanced heading is LAN IP Setup. This menu allows configuration of local TCP/IP addresses, DHCP and address reservation. From the Main Menu of the browser interface, under Advanced, click on LAN IP Setup to view the LAN IP Setup menu, shown below. Figure 5-6 Advanced Configuration of the Router 5-9 v1.0, 2006-04