Netgear WNR854T WNR854T Reference Manual - Page 76
Power Light Stays Amber, LAN or Internet Port Lights Not - troubleshooting
UPC - 606449047271
View all Netgear WNR854T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
RangeMax NEXT Wireless Router Model WNR854T Reference Manual Power Light Stays Amber When the router is turned on, the power light is amber and then changes to green after about 30 seconds. If the power light stays amber, there is a fault within the router. If the power light is still amber 1 minute after power-on: • Cycle the power to see if the router recovers. • Clear the router's configuration to factory defaults. This will set the router's IP address to 192.168.1.1. This procedure is explained in "Restoring the Default Configuration and Password" on page -7. If the error persists, you might have a hardware problem and should contact technical support. LAN or Internet Port Lights Not On If either the LAN lights or Internet light do not light when the Ethernet connection is made, check the following: • Make sure that the Ethernet cable connections are secure at the router and at the hub or workstation. • Make sure that power is turned on to the connected hub or workstation. • Be sure you are using the correct cable. Note: When connecting the router's Internet port to a cable or DSL modem, use the cable that was supplied with the cable or DSL modem. This cable could be a standard straight-through Ethernet cable or an Ethernet crossover cable. Troubleshooting the Web Configuration Interface If you are unable to access the router's Web Configuration interface from a computer on your local network, check the following: • Check the Ethernet connection between the computer and the router as described in the previous section. 6-2 Troubleshooting v1.0, 2006-04