Nikon 9237 User Manual - Page 37

FH-835M Holder for 35-mm Slides, Inserting Slides, FH-869S Holder for Medium-Format Film

Get Nikon 9237 - Super Coolscan 9000 ED PDF manuals and user guides
UPC - 018208092376
View all Nikon 9237 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

FH-835M Holder for 35-mm Slides The FH-835M can be used to scan up to five 35-mm slides with mounts 1.0-3.2 mm thick. Slide the mounts into place between the guides, short side first and with the reflective film base up (the matte emulsion surface down; 26). Stop when the slides contact the base of the clips. Arrow Thumbnails displayed in order shown Guides Direction of insertion Inserting Slides Insert slides between the guides. Forcing the slides onto the guides could damage the slides or clips and prevent the scanner from focusing correctly. To minimize resistance, try inserting slides at a slight angle. Be sure a slide is inserted in the first slot. Leaving the aperture at the left end of the holder uncovered could cause scanning errors or interfere with accurate color reproduction. Proceed to "Step 3-Open the Scan Window" ( 30). FH-869S Holder for Medium-Format Film The FH-869S can be used to scan medium-format (120/220, 2¼ or Brownie) film and 59 × 82 mm electron-microscope film. The length of the film strip that can be inserted in the holder depends on the type of film: • 6 × 4.5: 1-4 frames • 6 × 6: 1-3 frames • 6 × 7-6 × 9: 1-2 frames 2.1 Open the holder Undo the latches and open the holder. 2.2 Insert film Place film in the holder with the reflective film base up (matte emulsion surface down; 26) and with the end of the film against the stops. Arrow Direction of insertion 28 Stops Thumbnails displayed in order shown

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
28
2.2
Insert film
Place film in the holder with the reflec-
tive film base up (matte emulsion sur-
face down;
26) and with the end of
the film against the stops.
FH-835M Holder for 35-mm Slides
The FH-835M can be used to scan up to five 35-mm slides with mounts 1.0–3.2 mm
thick.
Slide the mounts into place between the guides, short side first and with the
reflective film base up (the matte emulsion surface down;
26).
Stop when the slides
contact the base of the clips.
Inserting Slides
Insert slides between the guides.
Forcing the slides onto the guides could damage the
slides or clips and prevent the scanner from focusing correctly.
To minimize resistance,
try inserting slides at a slight angle.
Be sure a slide is inserted in the first slot.
Leaving the aperture at the left end of the hold-
er uncovered could cause scanning errors or interfere with accurate color reproduction.
Proceed to “Step 3 — Open the Scan Window” (
30).
Direction of
insertion
Thumbnails
displayed in
order shown
Guides
2.1
Open the holder
Undo the latches and open the
holder.
FH-869S Holder for Medium-Format Film
The FH-869S can be used to scan medium-format
(120/220, 2¼ or Brownie)
film and
59 × 82 mm electron-microscope film.
The length of the film strip that can be inserted in
the holder depends on the type of film:
• 6 × 4.5: 1–4 frames
• 6 × 6: 1–3 frames
• 6 × 7 – 6 × 9: 1–2 frames
Stops
Direction
of insertion
Thumbnails
displayed in
order shown
Arrow
Arrow