Nikon 9237 User Manual - Page 69
FH-8G1 Medical Holder
![]() |
UPC - 018208092376
View all Nikon 9237 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
FH-8G1 Medical Holder The FH-8G1 can be used to scan up to three glass microscope slides of prepared tissue samples. Slides must be 26 × 76 mm with a base 0.8-1.5 mm thick, a cover no more than 25 mm wide, 60 mm long, and 0.18 mm thick, and a total thickness of no more than 2 mm, including adhesive. Inserting Slides Insert the slides cover up. Stop when the slide contacts the base of the clips. Guides Inserting Slides Insert slides between the guides. Forcing the slides onto the guides could damage the slides or clips and prevent the scanner from focusing correctly. To minimize resistance, try inserting slides at a slight angle. Clips Arrow Thumbnails displayed in order shown Direction of insertion Removing Slides Slide the samples out from under the clips that hold them in place. Do Not Use Force Do not use force when removing slides. Failure to observe this precaution could damage the clips. Do not lift the slides up until fully removed from the clips. Do Not Store Slides in the Holder Leaving slides in the holder for extended periods could damage the clips holding the slides in place. Do Not Use Digital ICE, Digital ROC, Digital GEM, or Digital DEE ( 50) Noise may appear in images scanned with Digital ICE, Digital ROC, Digital GEM, or Digital DEE. Scanning 35-mm Slides The FH-8G1 can also be used to scan 35-mm slides. Do not mix 35-mm slides with microscope slides. 60
![](/manual_guide/products/nikon-9237-user-manual-620e37d/69.png)