Nikon 9237 User Manual - Page 73
Computers Without an Empty Full-Sized PCI Slot
![]() |
UPC - 018208092376
View all Nikon 9237 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Problem Possible cause • Other IEEE 1394 devices are connected and turned on Disconnect the other devices. If the scanner is connected via a hub, 5, 22 adapter, or extension cable, disconnect the scanner and reconnect it directly to the computer. If this does not solve the problem, unin- stall all software that uses the IEEE 1394 interface and reinstall Nikon Scan. • Interface board is not compatible At the time of writing, operation has been confirmed only with the 10, 15, interface board provided with the scanner. Operation is not guaran- 64-69 Computer does not recognize scanner (continued) teed with other boards or with built-in IEEE 1394 ports. Install the supplied interface board (desktop computers) or consult a Nikon service representative for information on approved IEEE 1394 interface boards or cards. • Interface board is not correctly installed Check the documentation provided with interface board or card. 64-69 • Scanner device driver is missing or corrupted (Windows only) Check that the device driver is correctly installed. 74-75 • Nikon Scan is not correctly installed Uninstall and reinstall Nikon Scan. For more information, see the 10-18, Nikon Scan Reference Manual. 70-72 • IEEE 1394 drivers require updating (Windows 98 SE only) Update the IEEE 1394 drivers. 65 Installing the IEEE 1394 (Firewire) Interface Board Users whose computer is not equipped with a compatible IEEE 1394 interface must install the supplied IEEE 1394 (Firewire) interface board (Macintosh users should note that beige G3 computers are not equipped with a built-in Firewire interface). To install the board, follow the steps below. Operating system Installation 1 Install the interface board. The board device drivers will be 66 Windows XP installed automatically when the computer is turned on. Windows 2000 Professional 2 Confirm that the board is correctly registered in the Windows 66-67 Windows Me Device Manager. Windows 98 SE 1 Update the IEEE 1394 drivers. 2 Install the interface board. 3 Install the drivers for the interface board. 65 66 68-69 Mac OS Install the interface board. 66 Computers Without an Empty Full-Sized PCI Slot The supplied IEEE 1394 board can only be installed in a full-sized PCI slot. It can not be installed in laptop computers or in computers with a low-profile PCI slot. For information on other approved boards and PCMCIA cards, see the Nikon web site for your area ( 2). 64
![](/manual_guide/products/nikon-9237-user-manual-620e37d/73.png)