Nikon COOLPIX S6500 Reference Manual - Page 261

Problem Cause/Solution A Date and time of recording are not correct. • If camera clock has not been set, "Date not set" indicator flashes during shooting and movie recording. Images and movies saved before clock is set are dated "00/00/0000 00:00" or "01/01/2013 00:00" respectively. Set the correct time and date from the Time zone and date option in the setup menu. • The camera clock is not as accurate as ordinary watches or clocks. Periodically compare the time of the camera clock with that of a more accurate timepiece and reset as required. 20, 104, E83 No indicators displayed in Hide info is selected for Photo info in Monitor monitor. settings in the setup menu. 104, E86 Print date not available. Time zone and date has not been set in the setup 20, 104, menu. E83 Date not imprinted on images even when Print date is enabled. • The current shooting mode is one that does not support Print date. • The date cannot be imprinted on movies. 104, E89 Screen for setting time zone and date is displayed when camera is turned on. Camera settings reset. Clock battery is exhausted; all settings were restored to their default values. 20, 22 Monitor turns off, and the power-on lamp flashes quickly. Battery temperature is high. Turn off camera and allow battery to cool down before resuming use. After the lamp flashes for three minutes, the camera will 25 turn off automatically. Pressing the power switch also turns off the camera. Camera becomes hot. The camera may become hot when used for an extended period of time to shoot movies or send images using an Eye-Fi card, or when used in a hot - environment; this is not a malfunction. Technical Notes and Index F9