Nikon D200 D200 User's Manual - Page 202
Camera Error Messages and Displays, Indicator, Problem, Solution, Control, panel, finder - error message when i attach lens
UPC - 018208252350
View all Nikon D200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
Camera Error Messages and Displays This section lists the indicators and error messages that appear in the viewfinder, control panel, and monitor when there is a problem with the camera. Indicator Control View- panel finder Problem Solution (blinks) Lens aperture ring is not locked Lock ring at minimum aperture at minimum aperture. (largest f/-number). 8 Low battery. Ready fully-charged spare battery. 10 • Battery exhausted. • Recharge or exchange with 10 fully-charged spare battery. (blinks) (blinks) • Battery information not avail- • Battery can not be used in cam- 11 able. era. (blinks) Camera clock is not set. Set camera clock. 12 No lens attached, or non-CPU lens attached without specifying maxi- Aperture value will be displayed 67, mum aperture. Aperture shown in if maximum aperture is specified. 69 stops from maximum aperture. ● (blinks) Camera unable autofocus. to focus using Focus manually. 60 • Choose lower sensitivity. 33 • Use optional Neutral Density 181 Subject too bright; overexposed. photo will be • (ND) filter In exposure mode: S Increase shutter speed 64 A Choose smaller aperture 66 (larger f/-number) • Choose a higher sensitivity (ISO 33 equivalency) Subject too dark; underexposed. photo will be • • Use optional Speedlight In exposure mode: S Lower shutter speed 177 64 A Choose a larger aperture 66 (smaller f/-number) selected in mode M and Change shutter speed or select 64, (blinks) mode dial rotated to S. mode M. 68 (blinks) (blinks) Speedlight that does not support i-TTL flash control attached and set to TTL. Change optional flash mode Speedlight. setting on 178 Technical Notes-Troubleshooting 192