Nikon D200 D200 User's Manual - Page 214

Autofocus Detection range AF-area mode Focus lock TTL phase detection by Nikon Multi-CAM1000 autofocus sensor module -1 - +19 EV (ISO 100 at 20 °C/68 °F) Single-area AF, dynamic-area AF, group dynamic-AF, dynamicarea AF with closest subject priority Focus can be locked by pressing shutter-release button halfway (single-servo AF) or by pressing AE-L/AF-L button Exposure Metering Matrix Center-weighted Spot Range (ISO 100 equivalent, f/1.4 lens, 20 °C/68 °F) Exposure meter coupling Exposure control Operating mode Exposure compensation Bracketing Exposure lock Three-mode through-the-lens (TTL) exposure metering 3D color matrix metering II (type G and D lenses); color matrix metering II (other CPU lenses); color matrix metering available with non-CPU lenses if user provides lens data; metering performed by 1,005-segment RGB sensor Weight of 75% given to 6, 8, 10, or 13-mm circle in center of frame Meters 3-mm circle (about 2.0% of frame) centered on active focus area (on center focus area when non-CPU lens is used) 0 - 20 EV (3D color matrix or center-weighted metering) 2 - 20 EV (spot metering) Combined CPU and AI Programmed auto with flexible program; shutter-priority auto; aperture priority auto; manual -5 - +5 EV in increments of or 1 EV Exposure and/or flash bracketing (2-9 exposures in increments of or 1 EV) Luminosity locked at detected value with AE-L/AF-L button Shutter Speed Electronically-controlled vertical-travel focal-plane shutter 30 s in steps of or 1 EV, bulb ISO Sensitivity (Recom- 100- 1600 in steps of or 1 EV with additional settings up to mended Exposure Index) 1 EV over 1600; auto gain to 1600 White balance Bracketing Auto (TTL white-balance with 1,005 pixels RGB sensor), six manual modes with fine-tuning, color temperature setting, and preset white balance 2-9 exposures in increments of 1, 2, or 3 Technical Notes-Specifications 204