Olympus C3020 C-3020 Zoom Reference Manual (5.6 MB) - Page 188

Troubleshooting Chapter 12 POSSIBLE CAUSES CORRECTIVE ACTION REF. PAGE The camera does not work or function buttons do not respond. 1 The power is off. 2 The batteries are loaded incorrectly. 3 The batteries are exhausted. 4 The batteries are temporarily unable to function. 5 It is connected to a personal computer. 6 The camera is in the sleep mode. 1 Set the mode dial to any position except OFF to turn on the camera. 2 Reload the batteries correctly. 3 Replace the batteries with new ones. 4 The batteries may be too cold. Keep them warm while using the camera. 5 The camera will not operate while it is connected to a personal computer. 6 Operate the camera (press the shutter button, turn the mode dial, etc.) P. 30 P. 25 P. 25 - P. 175 P. 30 No picture is taken when the shutter button is pressed. 1 The mode dial is set to . 2 The memory gauge is full. 3 The flash has not finished charging. 4 The card access lamp blinks after shooting in the Movie mode. 5 There is a problem with the card. 6 The card is full. 1 Set the mode dial to any position except . 2 Wait until there is room in the memory gauge. 3 Release your finger from the shutter button. When the orange lamp stops blinking, try to shoot again. 4 The recorded movie image data is being written to the SmartMedia card. You can start shooting again when the card access lamp stops blinking. 5 See the error code chart. 6 Replace the card or delete unwanted pictures, etc. P. 64 P. 83 P. 92 P. 85 P. 196 P. 29, 141, 142 188