Olympus D-510 Zoom D-510 Zoom Instruction Manual - Page 46
Getting Started, Turning the Power On in Playback Mode, Make sure the lens barrier is, closed.
View all Olympus D-510 Zoom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Getting Started Turning the Power On in Playback Mode 1 Make sure the lens barrier is closed. 2 Press the monitor button ( ). • The camera turns on in 1 playback mode and the monitor displays the last image taken. • "NO PICTURE" is displayed on the monitor if no pictures have been taken. Any problems with the card are indicated on the monitor (p.19). • The battery check mark blinks when the batteries are running low (p.20). 2 If the camera is left untouched for three minutes when using the batteries, it automatically turns off. It is strongly recommended, however, that you switch power off promptly when you are finished using the camera. When using new batteries, it may take longer for the camera to shut down automatically depending on the type of batteries being used. CAUTION • Never open the card cover, remove the batteries or card, or disconnect the AC adapter while the camera is in operation as this could result in damage to the data stored on the card. When changing cards, be sure to turn the power off before opening the card cover. • Do not press on the monitor as this could leave a mark on the screen, interfere with image display, or even crack the monitor. HELP • After turning the power on, the monitor may flash and display an image after 0.5 to 2 seconds. This is not a malfunction. 36