Olympus D-510 Zoom D-510 Zoom Instruction Manual - Page 74
Using the Flash, Switching Between Flash Modes
View all Olympus D-510 Zoom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Using the Flash Switching Between Flash Modes Select the appropriate flash mode according to the shooting conditions. Note that the flash will not operate when shooting sequential shots (p.57), shooting movie pictures (p.60) and taking panoramic shots (p.82). Also, the working range of the flash changes when you operate the zoom lever (p.30). The camera is automatically set to auto-flash mode when the power is turned on. Changing the flash mode to other settings will cause the flash mode mark to be displayed on the monitor. Monitor 2 3 HQ 1 Open the lens barrier. • The camera turns on in shooting mode. 2 Press ୴ ( ) on the arrow pad. • The monitor will illuminate and one of the flash mode marks shown in the table below will be displayed. • Each time you press ୴ the flash mode will change to the next mode shown in the table below. 3 Press ୴ on the arrow pad several times until the symbol for the flash mode you want to use is displayed on the monitor. Flash mode mark (Displayed except auto-flash mode) See the table on the following page for a description of the various possible flash modes. 64