Olympus DM 520 DM-420 Detailed Instructions (English) - Page 48
Press the, button to start, recording.
UPC - 807360860868
View all Olympus DM 520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Menu setting method • [OVER] may be displayed even when the indicator of the recording level Low Cut Filter meter does not reach or is over to The recorder has a Low Cut Filter function to the right.If sound distortions do not minimize low-frequency sounds and record disappear even after the recording voices more clearly. This function can reduce level has been adjusted, change the noise from air conditioners, projectors and setting for microphone sensitivity (☞ other similar noises. P.47) and adjust the recording level again . • Inputting a very loud sound may [On]: Enables the Low Cut Filter function. [Off]: Disables this function. produce noise even when the recording level is set to [Auto]. • The level can be adjusted from [01] to VCVA [16]. The higher the number, the higher the level and the larger the indicator position on the level meter. When the microphone senses that sounds have reached a preset threshold volume level, the built-in Variable Control Voice Actuator (VCVA) 4 Zoom Mic starts recording automatically, and stops when the volume drops below the threshold level. The VCVA feature extends recording The directional microphone function utilizes DiMAGIC's (DiMAGIC Co., Ltd.) DiMAGIC Virtual Microphone (DVM) technology. DVM is an audio pickup system which allows you to record by focusing on sound from any direction. From expansive stereo recording to high directivity recording, DVM represents time and conserves memory by stopping recording during silent periods, which helps the playback to be more efficient. [On]: Enables the VCVA function. Will start recording in VCVA mode. [Off]: Disables this function. Will resume recording in normal mode. the latest in directional control methods Adjust the start/stop actuation that allow you to switch to a single exclusive level: microphone. [Zoom]: Recording with monaural, however you 1 Press the RECs button to start recording. can record high directivity sound. • When the sound volume is lower than [Narrow]: the preset threshold sound level, Recording by a directivity stereo sound. recording automatically stops after [Wide]: 1 sec approximately, and [Standby] Recording by an expansive stereo sound. [Off]: Disables this function. flashes on the display. The recording indicator light glows when recording starts and flashes when recording pauses. Menu setting method 48