Onkyo SC886 Instruction Manual - Page 26
Connecting Antenna, Connecting the Indoor FM Antenna
UPC - 751398008405
View all Onkyo SC886 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Connecting the AV Controller-Continued Connecting Antenna This section explains how to connect the supplied indoor FM antenna and AM loop antenna, and how to connect commercially available outdoor FM and AM antennas. The AV controller won't pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner. ■ North American Model AM ANTENNA push terminals 2 Use thumbtacks or something similar to fix the FM antenna into position. Thumbtacks, etc. FM ANTENNA jack ■ Other Models AM ANTENNA push terminals Caution: Be careful that you don't injure yourself when using thumbtacks. If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna instead (see page 27). Connecting the AM Loop Antenna The supplied indoor AM loop antenna is for indoor use only. 1 Assemble the AM loop antenna, inserting the tabs into the base, as shown. FM ANTENNA jack Connecting the Indoor FM Antenna The supplied indoor FM antenna is for indoor use only. 1 Attach the FM antenna, as shown. ■ North American Model FM 75 Insert the plug fully into the jack. ■ Other Models FM75 Insert the plug fully into the jack. Once your AV controller is ready for use, you'll need to tune into an FM radio station and adjust the position of the FM antenna to achieve the best possible reception. 26 2 Connect both wires of the AM loop antenna to the AM push terminals, as shown. (The antenna's wires are not polarity sensitive, so they can be connected either way around.) Make sure that the wires are attached securely and that the push terminals are gripping the bare wires, not the insulation. ■ North American Model Push Insert wire Release