Onkyo SC886 Instruction Manual - Page 94

tons to select a speaker, and use, tion, and then press [ENTER].

Get Onkyo SC886 - PR Preamplifier / Processor PDF manuals and user guides
UPC - 751398008405
View all Onkyo SC886 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 94 highlights

Advanced Setup-Continued 3 Use the Up and Down [R]/[X] but- 6 Repeat step 5 until the volume of tons to select "2. Speaker the test tone from each speaker Setup", and then press [ENTER]. is the same. The "Speaker Setup" menu appears. If you're using a handheld sound level meter, adjust the level of each speaker 2. Speaker Setup 1. Speaker Settings 2. Speaker Config 3. Speaker Distance 4. Level Calibration 5. Equalizer Settings 6. THX Audio Setup so that it reads 75 dB SPL at the listening position, measured with C-weighting and slow reading. 7 Press the [SETUP] button. Setup closes. MOVE ENTER ENTER RETURN RETURN SETUP EXIT 4 Use the Up and Down [R]/[X] but- tons to select "4. Level Calibra- tion", and then press [ENTER]. Notes: The "Level Calibration" screen appears and the pink noise test tone is output by the front left speaker. • Speaker levels can also be adjusted by using the dedicated buttons on the remote controller. Press the [TEST TONE] button to output the test tone. Use the [CH SEL] button to select each speaker, and use the 2-4. Level Calibration Left -12.0dB Center -12.0dB Right -12.0dB SurrRight -12.0dB SurrBack R -12.0dB SurrBack L -12.0dB SurrLeft -12.0dB Subwoofer -15.0dB Speaker A [LEVEL-] and [LEVEL+] buttons to adjust the level. • This procedure can also be performed on the AV controller by using its [SETUP] button, arrow buttons, and [ENTER] button. MOVE VALUE RETURN RETURN SETUP EXIT Note: Levels cannot be adjusted for speakers set to "No" or "None" in the Speaker Configuration (page 89). 5 Use the Up and Down [R]/[X] but- tons to select a speaker, and use the Left and Right [F]/[S] but- tons to adjust the level. Levels can be adjusted from -12 to +12 dB in 0.5 dB steps (-15 to +12 dB for the subwoofer). Notes: • The "Center" level cannot be set if the "Center" is set to "None" (page 89). • The "SurrRight" and "SurrLeft" levels cannot be set if the "Surround" is set to "None" (page 89). • The "SurrBack R" and "SurrBack L" levels cannot be set if "Speaker Type" is set to "Bi-Amp" (page 55), "SurrBack" is set to "None" (page 89). • The "Subwoofer" levels cannot be set if "Subwoofer" is set to "No" (page 90). 94

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
94
Advanced Setup
—Continued
Notes:
•
Speaker levels can also be adjusted by using the dedi-
cated buttons on the remote controller. Press the
[TEST TONE] button to output the test tone. Use the
[CH SEL] button to select each speaker, and use the
[LEVEL–] and [LEVEL+] buttons to adjust the level.
•
This procedure can also be performed on the AV con-
troller by using its [SETUP] button, arrow buttons,
and [ENTER] button.
3
Use the Up and Down [
q
]/[
w
] but-
tons to select “2. Speaker
Setup”, and then press [ENTER].
The “Speaker Setup” menu appears.
4
Use the Up and Down [
q
]/[
w
] but-
tons to select “4. Level Calibra-
tion”, and then press [ENTER].
The “Level Calibration” screen appears
and the pink noise test tone is output by
the front left speaker.
Note:
Levels cannot be adjusted for speakers
set to “No” or “None” in the Speaker
Configuration (page 89).
5
Use the Up and Down [
q
]/[
w
] but-
tons to select a speaker, and use
the Left and Right [
e
]/[
r
] but-
tons to adjust the level.
Levels can be adjusted from –12 to
+12 dB in 0.5 dB steps (–15 to +12 dB
for the subwoofer).
Notes:
•
The “Center” level cannot be set if
the “Center” is set to “None”
(page 89).
•
The “SurrRight” and “SurrLeft” lev-
els cannot be set if the “Surround” is
set to “None” (page 89).
•
The “SurrBack R” and “SurrBack L”
levels cannot be set if “Speaker
Type” is set to “Bi-Amp” (page 55),
“SurrBack” is set to “None”
(page 89).
•
The “Subwoofer” levels cannot be
set if “Subwoofer” is set to “No”
(page 90).
2. Speaker Setup
1. Speaker Settings
2. Speaker Config
3. Speaker Distance
4. Level Calibration
5. Equalizer Settings
6. THX Audio Setup
MOVE
ENTER
RETURN
ENTER
RETURN
EXIT
SETUP
RETURN
RETURN
EXIT
SETUP
MOVE
VALUE
2–4. Level Calibration
Left
Center
Right
SurrRight
SurrBack R
SurrBack L
SurrLeft
Subwoofer
-12.0dB
-12.0dB
-12.0dB
-12.0dB
-12.0dB
-12.0dB
-12.0dB
-15.0dB
Speaker A
6
Repeat step 5 until the volume of
the test tone from each speaker
is the same.
If you’re using a handheld sound level
meter, adjust the level of each speaker
so that it reads 75 dB SPL at the listen-
ing position, measured with C-weight-
ing and slow reading.
7
Press the [SETUP] button.
Setup closes.